Air conditioning installation is a specialised job that can only be conducted by trained specialists. Well, there are individuals who would try to do DIY. However, in most cases, they end with a botched installation. We always recommend hiring experts for air conditioning installation in Brisbane, not just because they are trained but because they have specialised tools. On this page, let us discuss the tools that these professionals would use to install air conditioning systems.
Multipurpose Screwdrivers and Nut Drivers: These professionals generally have multi-purpose screwdrivers with flatheads, cabinet bits, keystone bits, slotted screws, and Allen-Recess screwdrivers. Besides, they will also have magnetic nut drivers as well as hex-head nut drivers. This will help them fix and unfix a wide range of spare parts.
Hacksaws: They also have hacksaws that will help cut copper tubes and several other metals. They will have several sizes of blades, and the size of the blades that they use depends on the metal that is to be cut or truncated. The blades vary in terms of inches and the number of teeth. Generally, they would use blades made of high-quality tungsten and molybdenum steel.
Snips and hand seamers: The professionals in air conditioning installation in Park Ridge would use snips and hand seamers to bend and flatten sheet metal. While the snip can be used to cut sheet metal to the required size, the awl will help with straight cutting or punching holes in the sheet metal. They will also have a crimper, which will let them conform metal parts to a section of the piping.
Wrenches: A wrench would help the professionals fasten the brass or copper nuts to the bolts of the AC unit. They generally use open-ended wrenches and socket-type wrenches. However, they also use box wrenches.
Vises: The professionals offering air conditioning installation in Calamvale will also use vises. These tools come with a jaw that is made up of aluminium, copper, or any other soft metal. Vise protects the spare parts of the air conditioning unit that are being worked on.
Power Drills: These professionals would also use a cordless, battery-powered drill as well as a 24-volt drill that is used for installing plastic as well as metal components.
Taps: These professional AC installers will also use taps that are made of hard alloy steel. They are used to cut threaded holes in the metal surface. The installer may make use of a taper tap for starting the cut, a plug type for cutting blind holes, and a bottoming tap for cutting full threads to the very base or bottom of the holes.
Files: These professionals will single- or double-cut files for cleaning and smoothing out different types of metal surfaces. They generally range from 4 to 12 inches.
Multimeter: They carry a multimeter that will help the installers verify whether the electrical current at the site of installation that is to be connected to the AC unit matches the requirements of the unit. If connected unchecked, the current can cause severe damage to the AC unit.
Apart from all these tools, professional AC installers will also use pressure gauges, staple guns, nitrogen regulators, psychrometers, and safety tools.
So you see, hiring AC installers has all these tools at their disposal that will help them come up with flawless installations. It’s the same with our installers at Links Air & Electrical. Call us to book an appointment for flawless installation.
