Electrical wiring can be complicated and it entirely depends on how big your property is and how many appliances, etc. you want to run. Nevertheless, the electricians have to set up the wiring carefully following certain steps and here we will see what they are. Thus, if you are in Brisbane, Gold Coast or any other town or suburb of Queensland, you can get an idea of the process of wiring by following the points that we have mentioned here.
- Developing a Writing Diagram
The first step that a professional electrician in Brisbane or from any other town or suburb in Queensland will follow is to design a writing diagram before commencing the wiring process.
This diagram will state the location of the breaker box and the wires that should reach each outlet. Without this diagram, the wiring cannot be set up properly. So, all electricians take time to design the same.
- Installation of Conduits
Now, in the second step, the electricians in Algester and the other suburbs of Queensland will install the longest wires first so that wastage of conduits can be avoided in walls. They will do this in a planned manner.
The electrician will install each wire in the upstairs and connect them through to the basement. This step is followed to avoid the usage of a ladder. With this, the wires can be easily spread between the floors.
The electrician will also leave some extra wire at each end just to avoid running into problems related to moving things.
- Planning the Outlets
In the third step, the electricians in Springfield and other suburbs of Queensland will determine the number of outlets and switches that each circuit will host. Generally, they will consider six outlets per a 110-voltage circuit if it is a residential complex.
On the inside of a building, they consider two outlets per circuit as is the standard for the kitchen or the areas where more wattage by the appliances are used.
- Drilling Wire Holes
In the fourth step, the electricians in Park Ridge and other suburbs of Queensland will drill holes to install the wires through the walls. But before that, they will determine what is there on the other side of the wall to avoid drilling through ductwork, water pipes, etc.
- Install the Breaker
Now, the electricians will install the breaker box so that it can be easily accessed in the future. Generally, it is installed in the basement.
- Pulling the Wires Through the Outlets
The electricians will pull the wire according to your designed diagram to the outlet nearby or circuit switches. But sometimes they can also run the wires through the box.
The electricians will use strip the outer plastic coating of the wires from the ends and attach them as designed.
- Installing Individual Circuits
Lastly, the electricians will install individual circuits for the wiring sets keeping in mind that they match the amperage of each wire.
So, these are the steps following which the electricians establish wiring.
Call Us for Electrical Emergency or Installation
Apart from electrical wiring we at Links Air & Electrical also provide ceiling fan installation in Gold Coast and Brisbane besides the other suburbs of Queensland. Therefore, to book a service from us, call us now and our electricians will reach your place on time.
